The perfect accessory for your RAM module.
For retail purchase, please go to Tech Sunny.
1. Insert the black female power connector into the male power connector on RAM Mod.
2. Disconect RAM from the inside of your pc and clip on the 2 semi-transparent plastic clips onto the ends.
3. Peal off the white paper protection off of the double-sided adhesive and place one side against the back of RAM Mod and the other side against the flat side of the clips.
4. With RAM Mod secured in place, slowly snap RAM back in place.
5. Insert RAM Mod switch into an available PCI slot.
6. Secure the switch by screwing the screws in place.
7. Plug the male 4-pin connector into power supply.
8. Place the blue plastic cap onto the female 4-pin connector if it is not being used.
Support all DIMM Modules.
8 styles of light twinkling diodes.
3 colors to choose from: Blue, Red, Gree |
|
|
|
|
